The DLS-30 Power Converter/Battery Charger from IOTA Engineering converts nominal 108-132 AC voltage to 13.4 DC voltage for both DC load operation and 12V battery charging.
As a power supply, the unit’s tightly controlled regulation allows the user to operate a nominal 12VDC load up to 30 amps.
As a battery charger, the unit will maintain the battery, delivering its full-rated current when the battery capacity falls sufficiently low. The voltage is set to deliver its maximum current for the necessary period of time to minimize undue stress to the battery caused by heating of its cells. This helps to ensure the longest possible life of the battery. Over time, as the battery nears its full capacity, the DLS-30 will automatically drop the current, providing a float-charge to the battery to prevent self-discharge of the cells.
The SBI12-LLD is a microprocessor-controlled Load Disconnect Isolator. The SBI12-LLD is designed specifically for use in LiFePO4 battery applications as a system to protect the lithium battery from being excessively discharged by auxiliary loads, enabling the auxiliary battery to remain above the level at which internal protection circuitry would activate. Falling below this threshold would prevent many chargers from recharging the battery.
This is crucial when you have water in your truck camper. When you’re done using your camper, open up the petcock to drain all the water from the fresh water tank.
The COVERED BUCKET is designed to receive and contain sink/bath waste water and provide the means to carry the waste to a suitable dumping area. Properly used, no spillage will occur at any time during the containment or while disconnecting and therefore meets the requirements of all known applicable ordinances and regulations. Garden hose threaded fitting with shut-off ball valve. No more spills and no more mess.
Achieve a safe and stable entry to your Four Wheel Pop Up Truck Camper with the original GlowStep system. These steps are extraordinarily sturdy by connecting the camper all the way to ground level.
Achieve a safe and stable entry to your Four Wheel Pop Up Truck Camper with the original GlowStep system. These steps are extraordinarily sturdy by connecting the camper all the way to ground level.
No assembly required, you can easily repair your camper door. This sliding panel helps keep unwanted bugs and pests out of your camper for a more enjoyable camping experience. (Note: This is the current replacement for the clear screen door slider, that unfortunately is no longer available). Measures 12″ x 12″ Made from black…
