-
$131.11
The SBI12-LLD is a microprocessor-controlled Load Disconnect Isolator. The SBI12-LLD is designed specifically for use in LiFePO4 battery applications as a system to protect the lithium battery from being excessively discharged by auxiliary loads, enabling the auxiliary battery to remain above the level at which internal protection circuitry would activate. Falling below this threshold would prevent many chargers from recharging the battery.
-
$6.50
Allows for easy blow out of excess water from your freshwater plumbing before winterizing.
-
$185.00
The ignition control board performs all the functions necessary to turn the furnace on and keep it running. Powered with 12V DC, the board sends signals to open the gas valve and emits a high output voltage that creates an ignition spark to light the burner.
-
$35.00
This is a replacement sail switch for select Atwood AFS Series Furnaces. The sail switch is an air proving device. It is a safety component that will not let ignition occur until it sees 75% of the motor’s rpm’s. It ensures that the combustion wheel is rotating fast enough so that there is a proper air and gas mixture for smooth ignition.
When the paddle of the switch is depressed, there should be continuity through the switch. If a sail switch needs to be replaced, it should be replaced with the exact same size. The most common problems with these switches are bent paddles, loose wire connections or an obstruction between the paddle and switch contact.
-
$253.00
This is a replacement circuit board for your Atwood G6A-8E Water Heater. This board sends a signal to your spark probe in order to ignite the propane to heat your water heater. If you are having difficulties the ignition on your water heater, the board could be faulty, or your spark probe could be faulty.
-
$40.00
New Large size Four Wheel Camper Badge for the outside of your camper.
Length of badge is 15 inches, and height is 6 inches (this measurement is from the top of the tree to the bottom of tree stump.)
VHB tape will be provided with the badge to secure to your camper. There is also a self-adhesive back if you would like a flush look.
-
$30.00
New small size Four Wheel Camper Badge for the outside of your camper.
Length of badge is 10 inches, and height is 3 and 3/4th inches (this measurement is from the top of the tree to the bottom of tree stump.)
VHB tape will be provided with the badge to secure to your camper. There is also a self-adhesive back if you would like a flush look.
-
$20.00
Our new and improved turnbuckles now come with a pin for added safety and security. These all aluminum, heavy duty turnbuckles make installing and removing your camper possible without any tools.
-
$10.00
Clean, clear economical strainers eliminate unnecessary repairs by keeping debris and other particles out of the pump. Screws directly on the pumphead. Transparent design shows when it is time to clean the bowl. Easy disassembly, cleaning and reassembly.
